Heater Done!

Got the control cables reattached and the inside of the car buttoned up. Fired up the engine and let it get good and warm and... nothing. No heat! I was dreading the idea of having to disassemble all of that stuff again, but then, suddenly, the air from the heater got hot! Only thing I can figure is there was an air bubble or something. Hopefully no need to disassemble again for a good long time. If I *do* need to take it back apart, we will be making some changes!

Connected the heater hoses... no leaks yet!

The blower motor is back in place and I fabricated new rubber ducting between intake, blower and plenum. I got the hoses attached but the inside work still needs to be done, with reattaching the Bowden cables and ducting, mounting the heat control knob and putting the trim back in place.

The plenum is mounted back in the car and the vacuum tank is mounted below it. None of the cables or lines are connected yet.