Alternator Conversion

Blew the generator or regulator today... not sure which and don't care, as a 10SI Delco alternator is going to go in the car now. Part number I used is the same as for the '76 Electra #7127-12. Started by pulling the old generator off. I then removed the mounting plate from the exhaust manifold and flipped it end for end. This allows the bottom of the new 10SI to bolt up to it with the right spacing on the pulley. However, a few mods were in order. This plate is a solid chunk of steel, instead of the bent dog-eared plate that my '49 had. So the edges where the alternator sits on the plate needed to be rounded and the forward nut that holds the plate to the manifold had to be countersunk. Easy work with a drill bit, Dremel and a file. That concluded today's activities. To be continued...